Data Sheets

Temporary support bracket for lumber joists and bridge deck material

All Weather Adhesive
A one-part, moisture cure that can be used in
both wet and dry conditions to adhere a variety of substrates. The high strength bond is flexible and can provide sealant properties. Its high initial green strength and non-slump formula is ideal for both vertical and horizontal applications. Cure time can be 24 hours or more, depending on the environment.

Steel rail channel for reliable, durable and adjustable connections to concrete

Slab Bolster, Slab Bolster Upper, Beam Bolster, Beam Bolster Upper, Bar Chair, High Chair, etc.

Sustainable, rust-proof alternative to traditional steel reinforcement.

BFRP Composite Rebar is 25% of the weight of steel and has a Specific Tensile Strength that is 2.5 times greater.

Better plywood, better performance, better forms! The best concrete appearance comes from using the best form face

All-in-one design includes the coil insert, sleeve, flange bolt and locator cap. The insert is unique because the bolt is an integral part of the assembly. The insert has wire legs for the slab thickness, plastic feet to prevent corrosion at the concrete surface, a welded coil insert, a 3/4” bolt with protective sleeve, and a disposable locator cap. When the disposable locator cap is removed, the 3/4” bolt is exposed, providing the anchor point for subsequent …

Accurately position, quickly locate and securely fasten tilt-up panel braces

Adjustable overhang deck support for both structural steel and precast concrete beams

Precast Overhang System / Stay-In-Place Fascia Form (SIPFF)
Reduce skilled labor needed to set bridge overhang and reduce risk associated with setting and removing bridge overhang brackets.
Beam flange is loaded evenly, reducing damage to fascia beam during concrete placement.
Accelerate bridge construction, one 5′ SIPFF can be set in 5 minutes.

Carbon Content
Steel form component strength relies on strictly controlled 1045 carbon content
Steel strength and performance relies on strictly controlled carbon content. Too little carbon and steel deforms, too much carbon and steel cracks.

Pre-engineered welding location for connections between adjoining precast concrete elements

Citrus Cleaner concentrate is a cost effective, natural citrus solvent, cleaner and degreaser. Citrus Cleaner is an innovative solution for the toughest industrial applications.

Reusable, coarse thread, self-cleaning coil bolt for concrete forming applications

Quickly adapt to changing concrete forming conditions by keeping a supply of coil rod on hand

2-Strut and 4-Strut designs, in standard and heavy-duty capacities, for job-built plywood forming

Baked-on powder coating provides a smooth, durable, and more weather-resistant finish

Quickly position and bolt pre-engineered precast concrete columns in place

Pressure-sensitive adhesive for positioning materials in tilt-up beds. 

Designed for lifting precast double tees and eliminating the job site costs of removal associated with stand lifters

Plate dowel assembly for efficient load transfer in concrete floors and pavements

Used with lumber edge forms to accurately position smooth steel dowels at a construction joint

Easily position smooth dowels with leave-in-place expansion boards, like cedar or polypropylene

Ideal for precast concrete edge lifts and rotation of thin-walled sections

Tapered dowel assembly for efficient load transfer in concrete floor and pavement joints

Reliable welding location for adjoining precast concrete walls and slabs

Build and reconfigure tilt-up panel forms more quickly with this reusable bracket

Construct and reconfigure tilt-up panel forms quickly with a reusable bracket

Quickly adapt to changing concrete forming conditions by keeping a supply on hand

15mm and 20mm threaded ties for quicker gangform assembly and stripping

15mm and 20mm Euro thread ties for faster gangform assembly and stripping

Transfer tie loads to the forming system with matching steel washers

Reactive form release agent. Form Release 250 is a chemically reactive, mineral oil base, concrete release agent specially engineered to positively prevent bonding of the concrete to forms and form liners.

Eliminate the hazards of protruding rebar and costs of form face replacement.

Low-thermal conducting fiber reinforced truss for precast concrete “sandwich” panels

High tensile strength W1.4 and W2.9 fiber wire mesh.

Fiber Reinforced Polymer (FRP) combines high strength fibers with chemically-resistant, load-transferring polymers.

Mechanical splicing system for horizontal and vertical precast elements. Groutec is designed to connect the precast elements either horizontally or vertically by positioning the rebar inside …

Sturdy steel mesh containers for sorting, stacking, storing and moving inventory

Delivers even load distribution to both sides of a sandwich panel and transfers the highest loads on panel edge

Adjustable overhang deck support for both structural steel and precast concrete beams.

These brackets can be used with an appropriate 3/4″ exterior hanger, such as the Type 9. Heavy Duty Bridge Overhang Brackets are fabricated with nail holes in the top of the horizontal member for securing the required lumber nailer to the bracket.

Designed for use with HD Bridge Overhang Bracket

Temporary and reusable ground support method for anchoring braces

Load-rated device for quickly connecting tilt-up brace shoes to helical ground anchors

L-shaped leg design for handling thin concrete slabs and pavement replacement sections

SureBuilt Concrete Forms & Accessories is a USA manufacturer of concrete construction products, including form ties, handset forms, bar support, Stud Rail, tilt-up hardware, precast hardware and pipe braces. With locations in Chicago, Tampa, Houston and Los Angeles, SureBuilt supplies independent dealers and their contractor customers throughout North …

Wire rope loop connection for precast concrete walls.

Precast concrete walls can be connected with single and double wire rope loops.

Sustainable, rust-proof alternative to traditional steel reinforcement. Maximum Strength GFRP Glass Fiber Reinforced Polymer Rebar is the only GFRP Rebar that is an Integrally Ribbed Maximum Strength Rebar.

Expanded metal sheet for leave-in-place concrete forming applications

Adjustable and reusable formwork alignment that eliminates the cost of 2×4 lumber bracing

Modular Brace
The first real tilt-up bracing innovation in fifty years… the modular design covers more sizes… the higher capacity supports larger panels… and that means savings on every job!
Plate-to-plate bolting maintains load capacity.

Eliminate misaligned embed plates and field welding by bolting panels directly to the foundation

A forming solution for changing dimensions where fixed length ties are not practical

Load-tested for supporting plywood decks or reshoring existing structures

Certifies products have been manufactured and tested in accordance with a SureBuilt Quality Control Plan.

An effective lifting insert for tilt-up panels, with disposable void former and adjustable plastic feet

Protect your forming crew from injury and impalement on protruding rebar

Wire chair and threaded holder for temporary screed support during concrete placement

High-capacity and versatile tie system used with crane-handled gangform systems

High-rise concrete floors are faster and more consistent with steel slab edge forms

A cost-effective way to protect concrete floors when handling tilt-up panels

Quickly install temporary fall protection rails on jobsites with concrete decking

Plastic supports for rebar and mesh positioning in concrete floors and pavements The Slab-On-Grade Chair, sometimes called a castle chair or bar chair, supports rebar and mesh at the proper elevation during concrete placement. The all-plastic, conical chair design will not corrode. Each chair accommodates two forming heights with just a quarter-turn, reducing inventory requirements and allowing for small grade variations. The integrated base provides stability and support on soft surfaces, without damaging the moisture barrier, insulating foam or other membrane. The holes in the base can be used to fasten or tie chairs in position when necessary. The Slab-On-Grade Chair meets the requirements to qualify as a CRSI Class 1 Bar Support and meets CRSI requirements per table 3-4. Plastic chairs support rebar and/or mesh, often in combination with dowel baskets, in concrete floors and …

Unique anchor provides simple panel-to-foundation connection without welding or bolting

Ties and brackets, with 3/4” plywood and 2×4 lumber, create a simple and effective forming system

The Solo Form System is designed to withstand up to 1500 pounds per square foot as defined by ACI- 347. There are a number of factors that contribute to concrete pressure, none of which are under the control of Surebuilt…

Telescoping aluminum beam design is adjustable for clear spans and deck support

An engineered load transfer system for horizontal movement in concrete slabs

Free movement joint with steel edge protection and integrated load transfer design

Joint edge protection and load transfer for existing to new concrete…

Joint edge protection cast into slab using wood forms

High-traffic industrial floors and pavements require precise load transfer, smooth slab-to-slab transition and joint protection. All of these requirements are met with the Steel Edge Nosing on Wood assembly.

Reusable stakes with nail holes for supporting lumber edge forms and other bracing

Tilt-up wall lifting insert designed for back shipping and rotating panels

Designed for horizontal-to-vertical edge lifts and shear rotation of thin-wall panels

An adjustable plastic support for accurately positioning embeds and weld plates

25% solids solvent-based cure & seal

SureCure & Seal 25 is a VOC compliant non-yellowing, acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.

Water-based cure & Seal (ASTM C-309 compliant)

SureCure & Seal WB is a water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, Seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.

Evaporation Retardant / Finishing Aid Concentrate

SureFilm CONCENTRATE is an economical concentrate that, can be diluted with potable water up to a 9 to 1 ratio, providing a very effective evaporation retardant and finishing aid for concrete flatwork.

Water-based, Control Joint Filler Stain Protectant

SureFlex CJ-Guard is a water-based blend of film-forming polymers that prevents or reduces staining of concrete due overfill of epoxy or polyurea joint fillers.

Rapid-curing, Semi-rigid Polyurea control joint filler

SureFlex CJ is a 100% solids, two-component, UV resistant, semi-rigid, rapid-curing, polyurea for filling control and construction joints in heavy duty industrial concrete floors.

Durable embedment strip for anchoring to concrete. SureGrip provides anchoring for all types of bolted joints when embeded in concrete, even if the screws need to be removed and attached again. SureGrip provides secure anchoring regardless of the number of times a screw needs to be …

An effective lifting insert with disposable void former and slide-on plastic feet

SureBuilt panels and fillers establish the quality standard for concrete forms

Standard and heavy duty ties used to space and secure modular forming systems

A water-based dissipating resin-based emulsion curing compound for use on freshly finished horizontal and vertical concrete surfaces. SureRez is formulated to provide an effective curing membrane that will begin to dissipate after exposure to sunlight, weathering and/or traffic.

Low-solids Lithium-Silicate Concrete Sealer / Densifier

SureSeal Li is an economical lithium-silicate sealer/densifier for concrete surfaces. SureSeal Li deeply penetrates and reacts with cured concrete.

Water-Based Siliconate Sealer / Densifier

SureSeal So is a proprietary, colorless chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. SureSeal So penetrates concrete surfaces to seal, densify and harden.

Reusable bolt and disposable expander nut for temporary anchor installations

An engineered load transfer system for horizontal movement in concrete slabs

High-capacity, reusable, gangform tie that spreads the tie spacing and reduces the number of ties

Reduce heat transfer through balcony penetrations from outdoor concrete balconies to indoor living spaces. The Thermal Break product combines the use of high-density foam with low conductivity concrete to break the transfer of heat to cold…

L-shaped loop design for stability and capacity in thin concrete segments

A self-centering tie and locking bracket, with 3/4” plywood and 2×4 lumber, for concrete forming

Certifies products have been manufactured and tested in accordance with a SureBuilt Quality Control Plan

Detailed lines, chamfered edges and smooth reveals for a better concrete appearance

The Unitec universal rebar splicing system can be assembled onsite using a standard impact wrench. The ends of rebar require no preparation prior to installation.

Double channel steel walers turn everyday panels into productive gangform systems

Quickly position and bolt pre-engineered precast concrete panels in place

Designed to provide tie rod adjustment in one-sided forming applications.

Welded wire truss helps produce energy savings in precast “sandwich” panel construction

An effective lifting insert with disposable void former and slide-on plastic feet. The XL Lift Insert is designed for lifting tilt-up panels. The insert develops high pull-out strength for every panel thickness up to 12” (see table). The integrated plastic former has antennae to identify the insert location and removable cap to keep concrete out of the recess. Once the disposable former is removed, the lifting insert is exposed. The slide-on plastic feet keep the steel insert legs away from the panel face to prevent …