From the Ground Up

Edge Form Brackets for 6″ to 12″ thick wall can be nailed, screwed or glued to lumber and concrete. The brackets can be stripped, stacked, saved and reused.

The one-piece, wedge-shaped plastic design braces tilt-up edge forms. The Edge Form Bracket has a 9” side for thinner walls and a 11” side for thicker walls. Both sides of the bracket have a flat surface with holes for attachment.

The top of the Edge Form Brackets should always be positioned below the overall form height so they do not interfere with concrete screeding or finishing.

Stop cutting and fumbling with lumber blocks for bracing. Start forming faster with the reusable 6×8 and 9×11 Edge Form Brackets.

Click here to review the digital Edge Form Brackets booklet, then contact SureBuilt for pricing and availability.

Manufacturing in Bellwood, IL, Fullerton, CA, Houston, TX, Jasper, TN, and Tampa, FL

/by
You might also like
SureClad Lock
There’s no need to stock every possible brace when you can simply reconfigure the components using a handful of nuts and bolts. Bigger Braces… Bigger Savings
The secret to the Modular Brace is a plate-to-plate connection with four torqued bolts (min 150 ft-lbs). This turns a selection of components into a single fixed unit. Fewer Tilt-Up Braces… More Savings!
There’s no need to stock every possible brace when you can simply reconfigure the components using a handful of nuts and bolts. Learn More at the Tilt-Up Expo in Denver
Order SoloForm Panels Right Now!
Dibs on the Ribs