Posts

I Mean a High Chair!

When your customers need High Chairs, start with SureBuilt.Individual High Chairs for supporting reinforcement bars in concrete

We have chairs that meet almost every project spec. Just give us the quantity, size and finish so we can get started on your order.

We have sizes from 1″ to 12″, in 1/2″ increments, with any fractional height in between.

We have Plain, Plastic-Dipped or Plastic-Tipped (pictured). We can also provide an optional epoxy coating or galvanized finish.

We designed the High Chair legs to span and straddle lower bars, while “cradling” upper bars at the specified elevation.

We spot-weld the chair legs to resist bending, maintaining proper concrete cover while supporting the rebar.

Check the Price List for more information or contact your SureBuilt representative to learn about all the Bar Support products we offer.

Keep Rebar Off the Deck!

Slab Bolster is used to support rebar and mesh at the proper elevation in concrete slabs. The legs are spaced 5” on-center and spot-welded to resist bending.

When a runner wire is spot-welded to the feet along the full length it becomes Slab Bolster Upper. This provides support on soft surfaces or upper level rebar.

Standard heights from 3/4” to 4”, in 1/4” increments, with other fractional sizes available on request. Options include plastic-dipped or plastic-tipped feet, and/or an epoxy-coated or galvanized finish.

Continuous High Chair is also used to support rebar and mesh at the proper elevation in concrete slabs. The legs are spaced 7-3/4” on-center and spot-welded to resist bending.

When a runner wire is spot-welded to the feet along the full length it becomes Continuous High Chair Upper. This provides support on soft surfaces or upper rebar levels.

Standard heights from 4” to 10”, in 1/2” increments, with other fractional sizes available on request. Options include plastic-dipped or plastic-tipped feet, and/or an epoxy-coated or galvanized finish.

Beam Bolster is used to support rebar at the proper elevation in beam form soffits. Legs are spaced 2-1/2” on-center and spot-welded to resist bending.

When a runner wire is spot-welded to the feet along the full length it becomes Beam Bolster Upper. This provides support on upper rebar levels.

Standard heights from 3/4” to 4”, in 1/4” increments, with other fractional sizes available on request. Options include plastic-dipped or plastic-tipped feet, and/or an epoxy-coated or galvanized finish.

Contact your SureBuilt representative to learn more about all the Bar Support products.