SureLift™ (SL) Insert Data Sheet
SureLift Insert*
An effective lifting insert with disposable void former
and slide-on plastic feet
The SureLift (SL) Insert is designed for lifting tilt-up
panels. The insert develops high pull-out strength for
every panel thickness up to 12” (see table).
The integrated plastic former has antennae to identify
the insert location and removable cap to keep
concrete out of the recess. Once the disposable
former is removed, the lifting insert is exposed.
The slide-on plastic feet, available for +1/4”, +1/2” or
+3/4” height adjustment, keep the steel insert legs
away from the panel face to prevent corrosion.
* U.S. Patent Pending
|
A SureLift (SL) Insert |
||||
|
Part No. Description Structural 8 |
Thickness 7 |
2.5:1 SWL* 6 (Tension lbs) 5 |
2:1 SWL* (Shear lbs) 4 |
|
|
SBRL22SL6 |
SL Insert 6” |
6” |
10,450 |
14,800 |
|
SBRL22SL634 |
SL Insert 6-3/4” |
6-3/4” |
10,450 |
14,800 |
|
SBRL22SL7 |
SL Insert 7” |
7” |
13,500 |
19,000 |
|
SBRL22SL714 |
SL Insert 7-1/4” |
7-1/4” |
13,500 |
19,000 |
|
SBRL22SL712 |
SL Insert 7-1/2” |
7-1/2” |
13,500 |
19,000 |
|
SBRL22SL734 |
SL Insert 7-3/4” |
7-3/4” |
13,500 |
19,000 |
|
SBRL22SL8 |
SL Insert 8” |
8” |
15,500 |
21,900 |
|
SBRL22SL812 |
SL Insert 8-1/2” |
8-1/2” |
15,500 |
21,900 |
|
SBRL22SL9 |
SL Insert 9” |
9” |
18,350 |
22,000 |
|
SBRL22SL914 |
SL Insert 9-1/4” |
9-1/4” |
18,350 |
22,000 |
|
SBRL22SL934 |
SL Insert 9-3/4” |
9-3/4” |
18,350 |
22,000 |
|
SBRL22SL10 |
SL Insert 10” |
10” |
20,550 |
22,000 |
|
SBRL22SL11 |
SL Insert 11” |
11” |
22,000 |
22,000 |
|
SBRL22SL12 |
SL Insert 12” |
12” |
22,000 |
22,000 |
DRAWN
xiaobo 8/22/2022
CHECKED
QA
MFG
APPROVED
* Safe Working Load (SWL) is based on testing in 3,000 psi concrete.
2525 Armitage Ave
Melrose Park, IL 60160
708-493-9569
www.surebuilt-usa.com
03/26Insulation Foot
Optional plastic feet are used for positioning a
SureLift Insert on rigid foam without piercing the
insulation surface. Four plastic feet are needed for
each insert, two for each shoe.
The inserts should always be positioned and tied to
rebar so the placement remains secure.
Insulation Foot
Part No. Description
SBIF Insulation Foot
SureLift Insert with Plate
When the structural thickness of an insulated panel is
less than 6”, a SureLift Insert with an integrated steel
plate may be needed. The plate and weld attachment
compensate for the smaller height of the insert.
The inserts should always be positioned and tied to
rebar so the placement remains secure.
SureLift (SL) Insert with Plate
Part No. Description Structural
Thickness
2.5:1 SWL*
(Tension lbs)
2:1 SWL*
(Shear lbs)
SBRL22SLP5 SL Insert 5” wPlate 5” 9,085 12,800
SBRL22SLP512 SL Insert 5-1/2” wPlate 5-1/2” 9,750 13,700
* Safe Working Load (SWL) is based on testing in 3,000 psi concrete.Double SureLift Insert
The capacity of the SureLift Insert is increased by
using two inserts in combination. The two inserts,
joined with a steel Spacer Strap, develop an even
higher pull-out strength for every panel thickness up
to 12” (see table).
Typical placement to prevent the Double Insert from
moving. Tie all rebar so installation is secure.
A Spreader Beam is used with
two Lifters and the double inserts
to handle heavier panels.
Double SureLift (SL) Insert* with Spacer Strap
Part No. Description Structural
Thickness
2.5:1 SWL**
(Tension lbs)
2:1 SWL**
(Shear lbs)
SBRL22SL6D Double SL Insert 6” wSpacer 6” 20,900 29,550
SBRL22SL634D Double SL Insert 6-3/4” wSpacer 6-3/4” 20,900 29,550
SBRL22SL7D Double SL Insert 7” wSpacer 7” 26,900 32,000
SBRL22SL714D Double SL Insert 7-1/4” wSpacer 7-1/4” 26,900 32,000
SBRL22SL712D Double SL Insert 7-1/2” wSpacer 7-1/2” 26,900 32,000
SBRL22SL734D Double SL Insert 7-3/4” wSpacer 7-3/4” 26,900 32,000
SBRL22SL8D Double SL Insert 8” wSpacer 8” 30,950 32,000
SBRL22SL812D Double SL Insert 8-1/2” wSpacer 8-1/2” 30,950 32,000
SBRL22SL9D Double SL Insert 9” wSpacer 9” 32,000 32,000
SBRL22SL914D Double SL Insert 9-1/4” wSpacer 9-1/4” 32,000 32,000
SBRL22SL934D Double SL Insert 9-3/4” wSpacer 9-3/4” 32,000 32,000
SBRL22SL10D Double SL Insert 10” wSpacer 10” 32,000 32,000
SBRL22SL11D Double SL Insert 11” wSpacer 11” 32,000 32,000
SBRL22SL12D Double SL Insert 12” wSpacer 12” 32,000 32,000
* Double SureLift Insert is two inserts connected with a Spacer Strap.
** Safe Working Load (SWL) based on testing in 3,000 psi concrete.Spacer Strap
The Spacer Strap is used to properly position two
inserts. The resulting Double SureLift Insert provides
the proper positioning, increased working load and
lifting locations needed for large panels.
The double insert should always be positioned and
tied to rebar so the placement remains secure.
Spacer Strap
Part No. Description
SBRL22SS18 Spacer Strap (18” OC)
Double SureLift Insert with Plate and Strap
When the structural thickness of a large insulated
panel is less than 6”, two inserts with an integrated
plate and strap may be needed. The resulting Double
SureLift Insert provides the proper positioning,
increased working load and lifting locations needed
for large panels.
Double SureLift (SL) Insert* with Plate and Spacer Strap
Part No. Description Structural
Thickness
2.5:1 SWL**
(Tension lbs)
2:1 SWL**
(Shear lbs)
SBRL22SLP5D Double SL Insert 5” wPlate/Strap 5” 18,170 25,600
SBRL22SLP512D Double SL Insert 5-1/2” wPlate/Strap 5-1/2” 19,500 27,400
* Double SureLift Insert is two inserts connected with a Spacer Strap.
** Safe Working Load (SWL) based on testing in 3,000 psi concrete.
