SureLift™ (SL) Insert Data Sheet
SureLift Insert*
An effective lifting insert with disposable void former and slide-on plastic feet
The SureLift (SL) Insert is designed for lifting tilt-up panels. The insert develops high pull-out strength for every panel thickness up to 12” (see table).
The integrated plastic former has antennae to identify the insert location and removable cap to keep concrete out of the recess. Once the disposable former is removed, the lifting insert is exposed.
The slide-on plastic feet, available for +1/4”, +1/2” or +3/4” height adjustment, keep the steel insert legs away from the panel face to prevent corrosion.
* U.S. Patent Pending
SureLift (SL) Insert
Part No.
Description
Structural Thickness
2.5:1 SWL* (Tension lbs)
2:1 SWL* (Shear lbs)
SBRL22SL6
SL Insert 6”
6”
10,450
14,800
SBRL22SL634
SL Insert 6-3/4”
6-3/4”
10,450
14,800
SBRL22SL7
SL Insert 7”
7”
13,500
19,000
SBRL22SL714
SL Insert 7-1/4”
7-1/4”
13,500
19,000
SBRL22SL712
SL Insert 7-1/2”
7-1/2”
13,500
19,000
SBRL22SL734
SL Insert 7-3/4”
7-3/4”
13,500
19,000
SBRL22SL8
SL Insert 8”
8”
15,500
21,900
SBRL22SL812
SL Insert 8-1/2”
8-1/2”
15,500
21,900
SBRL22SL9
SL Insert 9”
9”
18,350
22,000
SBRL22SL914
SL Insert 9-1/4”
9-1/4”
18,350
22,000
SBRL22SL934
SL Insert 9-3/4”
9-3/4”
18,350
22,000
SBRL22SL10
SL Insert 10”
10”
20,550
22,000
SBRL22SL11
SL Insert 11”
11”
22,000
22,000
SBRL22SL12
SL Insert 12”
12”
22,000
22,000
* Safe Working Load (SWL) is based on testing in 3,000 psi concrete.
840 South 25th Ave Bellwood, IL 60104 708-493-9569 www.surebuilt-usa.com
01/24
Insulation Foot
Optional plastic feet are used for positioning a SureLift Insert on rigid foam without piercing the insulation surface. Four plastic feet are needed for each insert, two for each shoe.
The inserts should always be positioned and tied to rebar so the placement remains secure.
SureLift Insert with Plate
When the structural thickness of an insulated panel is less than 6”, a SureLift Insert with an integrated steel plate may be needed. The plate and weld attachment compensate for the smaller height of the insert.
The inserts should always be positioned and tied to rebar so the placement remains secure.
Insulation Foot
Part No.
Description
SBIF
Insulation Foot
SureLift (SL) Insert with Plate
Part No.
Description
Structural Thickness
2.5:1 SWL* (Tension lbs)
2:1 SWL* (Shear lbs)
SBRL22SLP5
SL Insert 5” wPlate
5”
9,085
12,800
SBRL22SLP512
SL Insert 5-1/2” wPlate
5-1/2”
9,750
13,700
* Safe Working Load (SWL) is based on testing in 3,000 psi concrete.
Double SureLift Insert
The capacity of the SureLift Insert is increased by using two inserts in combination. The two inserts, joined with a steel Spacer Strap, develop an even higher pull-out strength for every panel thickness up to 12” (see table).
A Spreader Beam is used with two Lifters and the double inserts to handle heavier panels.
Typical placement to prevent the Double Insert from moving. Tie all rebar so installation is secure.
Double SureLift (SL) Insert* with Spacer Strap
Part No.
Description
Structural Thickness
2.5:1 SWL** (Tension lbs)
2:1 SWL** (Shear lbs)
SBRL22SL6D
Double SL Insert 6” wSpacer
6”
20,900
29,550
SBRL22SL634D
Double SL Insert 6-3/4” wSpacer
6-3/4”
20,900
29,550
SBRL22SL7D
Double SL Insert 7” wSpacer
7”
26,900
32,000
SBRL22SL714D
Double SL Insert 7-1/4” wSpacer
7-1/4”
26,900
32,000
SBRL22SL712D
Double SL Insert 7-1/2” wSpacer
7-1/2”
26,900
32,000
SBRL22SL734D
Double SL Insert 7-3/4” wSpacer
7-3/4”
26,900
32,000
SBRL22SL8D
Double SL Insert 8” wSpacer
8”
30,950
32,000
SBRL22SL812D
Double SL Insert 8-1/2” wSpacer
8-1/2”
30,950
32,000
SBRL22SL9D
Double SL Insert 9” wSpacer
9”
32,000
32,000
SBRL22SL914D
Double SL Insert 9-1/4” wSpacer
9-1/4”
32,000
32,000
SBRL22SL934D
Double SL Insert 9-3/4” wSpacer
9-3/4”
32,000
32,000
SBRL22SL10D
Double SL Insert 10” wSpacer
10”
32,000
32,000
SBRL22SL11D
Double SL Insert 11” wSpacer
11”
32,000
32,000
SBRL22SL12D
Double SL Insert 12” wSpacer
12”
32,000
32,000
* Double SureLift Insert is two inserts connected with a Spacer Strap. ** Safe Working Load (SWL) based on testing in 3,000 psi concrete.
Spacer Strap
The Spacer Strap is used to properly position two inserts. The resulting Double SureLift Insert provides the proper positioning, increased working load and lifting locations needed for large panels.
The double insert should always be positioned and tied to rebar so the placement remains secure.
Double SureLift Insert with Plate and Strap
When the structural thickness of a large insulated panel is less than 6”, two inserts with an integrated plate and strap may be needed. The resulting Double SureLift Insert provides the proper positioning, increased working load and lifting locations needed for large panels.
* Double SureLift Insert is two inserts connected with a Spacer Strap. ** Safe Working Load (SWL) based on testing in 3,000 psi concrete.
Spacer Strap
Part No.
Description
SBRL22SS18
Spacer Strap (18” OC)
Double SureLift (SL) Insert* with Plate and Spacer Strap
Part No.
Description
Structural Thickness
2.5:1 SWL** (Tension lbs)
2:1 SWL** (Shear lbs)
SBRL22SLP5D
Double SL Insert 5” wPlate/Strap
5”
18,170
25,600
SBRL22SLP512D
Double SL Insert 5-1/2” wPlate/Strap
5-1/2”
19,500
27,400
