Anchor Rail HD
Anchor Rail HD
Cast-in-place galvanized channel for positioning and
anchoring connections
The durable steel Anchor Rail HD provides a connecting channel in
reinforced concrete. The channel is included in the forming plans and
foam-filled to protect it during concrete placement. The foam is easily
removed before positioning the subsequent anchors.
T-Straps and Bolt Straps fit into the Anchor Rail HD channel and move
anywhere along the length of the rail. The straps are used to anchor pipe
supports, electrical chases and mechanical equipment. The channel and
straps support loads up to 3,750 lbs at a 3:1 safety factor.
The galvanized Anchor Rail HD resists corrosion and withstands concrete
shrinkage or movement. It is ideal for installation in concrete compression
and tensile stress areas.
Part No. SBARHD8G Anchor Rail HD – Dimensions
A B C L
2” 1-1/4” 5-1/4” 8”
|
Anchor Rail HD – Properties |
||||
|
Load |
Capacity |
SWL* |
Min Edge** Perpendicular |
Min Edge** Parallel |
|
Pull-Out |
11,250 lbs |
3,750 lbs |
3” |
4” |
|
Shear |
5,500 lbs |
1,833 lbs |
3” |
4” |
*
**
Safe Working Load based on a safety factor of 3:1 in minimum 3,000 psi concrete.
Additional reinforcement required when rail placed close to edges or openings.
2525 Armitage Ave
Melrose Park, IL 60160
708-493-9569
www.surebuilt-usa.com
02/26T-Strap* – Plain or Galvanized
Part No. Width Length Thickness Weight
SBARTS8 2” 8” 3/8” 1.7 lbs
SBARTS10 2” 10” 3/8” 2.2 lbs
SBARTS12 2” 12” 3/8” 2.6 lbs
* Strap must be installed by certified welder.
* Strap must be at right angle to rail to meet published capacity.
* For Galvanized, add “G” to end of part no.
Bolt Strap* – Plain or Galvanized
Part No. Width Length Thickness Weight
SBARTRS8 2” 8” 3/8” 1.7 lbs
SBARTRS10 2” 10” 3/8” 2.2 lbs
SBARTRS12 2” 12” 3/8” 2.6 lbs
* Strap must be at right angle to rail to meet published capacity.
* For Galvanized, add “G” to end of part no.
Rail Nut – Plain or Galvanized
SWL
3,750 lbs
4
3
Part No. Size SBARRN34NCG 3/4” NC * For Galvanized, add “G” to end of part no.
1
4
3
2
T-Bolt – M16 8.81
B
Serrated Hex Flange Nut
.412
.825
B B
R.33
2
.125
.060
.140
.140
5/8-11 UNC – 2A
n.300
B
n.300
1.50
.750
.500
*Insert the T-Bolt into the Anchor Rail HD channel slot. After
R.33
A A
.625
2.000
*The serrated flange resists loosening due to vibration.
R.33
a 90o turn clockwise the T-Bolt locks into position.
DIMENSIONS ARE IN INCHES
REV:
MATERIAL:
UNLESS OTHERWISE SPECIFIED
A
TOLERANCE:
FRACTIONS: ±1/32″
SIZE:
DECIMALS:
*SureBuilt T-Bolts only work with SureBuilt Anchor Rail HD.
NOTE: THE INFORMATION CONTAINED
0.0………..±0.063
B
IN THIS DRAWING IS THE SOLE
0.00………±0.031
PROPERTY OF SUREBUILT COMPANY.
840 S. 25TH AVE. BELLWOOD, IL 60104
ANY REPRODUCTION IN PART OR AS
0.000…….±0.010
SCALE:
FINISH: WEIGHT:
A WHOLE WITHOUT THE WRITTEN
ANGLES: ±1°
PHONE: (708) 493-9569 – FAX: (708) 493-9601
PERMISSION OF SUREBUILT
N.T.S.
UNLESS OTHERWISE SPECIFIED .37
LBS
COMPANY IS PROHIBITED.
TITLE:
DATE:
10-24-2025
ANCHOR RAIL 5/8″
-11 x 2″ T-Bolt
DRAWN:
DDM
PART NO:
CHECKED:
DWG. NO: SHEET:
APPROVED:
1
OF
1
4
3
2
1
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
REV:
MATERIAL:
TITLE:
NOTE: THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF SUREBUILT COMPANY.
ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF SUREBUILT
COMPANY IS PROHIBITED.
TOLERANCE:
GRADE 8 STEEL
FRACTIONS: ±1/32″
SIZE:
DECIMALS:
0.0………..±0.063
B
0.00………±0.031
0.000…….±0.010
SCALE:
FINISH: WEIGHT:
ANGLES: ±1°
N.T.S.
UNLESS OTHERWISE SPECIFIED .11
M16 SERRATED FLANGE HEX NUT DIN 6
PART NO:
DWG. NO: SHE
LBS
1
3
2
Part No. T-Bolt and Serrated Flange Nut
2525 ARMITAGE AVE., MELROSE PARK, IL 60160 PHONE: (708) 493-9569 – FAX: (708) 493-9601
4
Description Size
1.50
SBM16TBOLT88 M16 T-Bolt 8.8 M16
SBSHFN Serrated Hex Flange Nut M16
.750
A
DATE:
