Try Staybox for Construction Joints Staybox provides a cost-effective and labor-saving solution for most concrete construction joints. There is no need to drill, alter or damage the form face during installation. The box provides the alignment and load transfer between placements. The system consists of bent rebar inside a leave-in-place box, creating a “pull out” bar […]
USA-Made for Infrastructure Projects Slab Bolster is used to support rebar and mesh at the proper elevation in concrete slabs. The legs are spaced 5” on-center and spot-welded to resist bending. When a runner wire is spot-welded to the feet along the full length it becomes Slab Bolster Upper. This provides support on soft surfaces or upper […]
Another Way to Form Concrete Coil Ties are resistance-welded for strength, performance and safety. Exactly what you need for job-built plywood forming. They’re available in almost any configuration, including: – 1/2″, 3/4″ 1″, and 1-1/4″ diameters – 2-strut or 4-strut design – Optional plastic cones – Optional water-resistant washers – Optional galvanized finish Just specify […]
You Can be Sure with SureLift Inserts The SureLift Insert is specially designed for lifting tilt-up panels. The insert develops high pull-out strength for every panel thickness so you can lift with confidence every time. The integrated plastic former has antennae to identify the insert location and removable cap to keep concrete out of the […]
Glass Fiber Reinforced Polymer Rebar Glass Fiber Reinforced Polymer Rebar (GFRP) is rust-proof, one-fourth the weight, and 2.5 times the tensile strength of steel reinforcement. It doesn’t take long to imagine the savings in transportation, handling and placing costs… and that doesn’t include the enhanced jobsite safety. GFRP is rated for, an almost unbelievable, 100+ […]
A Complete Set of Brace Insert Options The Brace Insert has wire legs, welded coil insert, and disposable plastic plug, providing an easy-to-locate attachment point for the subsequent tilt-up panel bracing. The wire legs have plastic feet to prevent corrosion at the concrete face. The plastic plug has antennae to quickly locate the insert after […]
Anchor Faster with Panel Base Connectors The tilt-up Panel Base Connector is easy to position in the bottom edge of the form. It can be placed in either a face-up or face-down orientation depending on forming and handling preference. The high-strength, drill-in 3/4”x10” screw-in anchor provides an immediate and secure connection when tightened. There is […]
ECO Dowel Basket for Concrete Slabs The new ECO Dowel Basket provides long lasting joint stability, reliable load transfer and smooth slab-to-slab transition, in a single cost-effective assembly. The patent-pending plastic sleeve allows movement and the steel plate provides bearing capacity, without the risk of slab interlock and cracking, to assure a high quality slab. […]
Contractors Report Savings of 50% and More Stop cutting lumber blocks for bracing and start forming concrete faster… this one-piece, all-plastic design is wedge-shaped to brace and support tilt-up edge forms. Save time and money by using and re-using Edge Form Brackets… no wasted lumber and no wasted effort… some contractors form panels in half […]
Use a Modular Brace The high-capacity Modular Brace means 50% fewer braces for many typical tilt-up applications. Of course, fewer braces reduce brace inventory, job site handling, panel attachment and dismantling time. Here are a few other things being mentioned: “The 42’ to 62’ Modular Brace lengths are the real “sweet spot” and make the most sense. […]
