Flat Washers Data Sheet

Flat Washers

Transfer tie loads to the forming system with

matching steel washers

Whether you call them Flat Washers, Plate Washers or Bearing Plates, we

have all the washer sizes you need for concrete forming.

Flat Washers are used to transfer tie loads to form frames, walers and/or

strongbacks. Just match the capacity of the tie, nut and washer.

There are Flat Washers suitable for coil rod, Euro rod, coil ties, taper ties,

Euro ties and she-bolts.

There are some typical industry sizes, but other sizes are always available to

match the forming situation.

Flat Washers*

Part No. Description Load

Rating**

SBFW142124916 Flat Washer 1/4”x2-1/2”x4” with 9/16” Hole 6,750 lbs

SBFW1434916 Flat Washer 1/4”x3”x4” with 9/16” Hole 6,750 lbs

SBFW1444916 Flat Washer 1/4”x4”x4” with 9/16” Hole 6,750 lbs

SBFW1445916 Flat Washer 1/4”x4”x5” with 9/16” Hole 6,750 lbs

SBFW14451316 Flat Washer 1/4”x4”x5” with 13/16” Hole 6,750 lbs

SBFW38551316 Flat Washer 3/8”x5”x5” with 13/16” Hole 14,000 lbs

SBFW12551516 Flat Washer 1/2”x5”x5” with 1-1/16” Hole 18,500 lbs

SBFW12551516 Flat Washer 1/2”x5”x5” with 1-5/16” Hole 18,500 lbs

SBFW34551916 Flat Washer 3/4”x5”x5” with 1-9/16” Hole 30,000 lbs

SBFW34771116 Flat Washer 3/4”x7”x7” with 1-1/16” Hole 30,000 lbs

SBFW34771516 Flat Washer 3/4”x7”x7” with 1-5/16” Hole 30,000 lbs

SBFW34771916 Flat Washer 3/4”x7”x7” with 1-9/16” Hole 30,000 lbs

*

**

Other sizes available on request.

Safe Working Load (SWL) based on 2:1 safety factor for forming.

2525 Armitage Ave

Melrose Park, IL 60160

708-493-9569

www.surebuilt-usa.com

03/26