SurePly™ Form Ties Data Sheet
SurePly Form Ties
Standard and heavy duty ties used to space and secure
modular forming systems
* Safe Working Load based on 2:1 safety factor.
Loop Ties are used with Wedge Bolts on modular form
panels. Each tie is fabricated with medium carbon wire
and electrically welded. Each side of the tie has a 2-1/8”
end and 1” breakback. Optional 1”x1” plastic cones,
neoprene washer or special breakback available.
|
Loop Tie |
||
|
Type |
Wire Size |
SWL * |
|
Standard Loop |
.225 |
2,250 lbs |
|
Heavy Duty Loop |
.243 |
3,000 lbs |
|
Gang Loop Tie |
||
|
Type |
Wire Size |
SWL * |
|
Standard Gang Loop |
.225 |
2,250 lbs |
|
Heavy Duty Gang Loop |
.243 |
3,000 lbs |
* Safe Working Load based on 2:1 safety factor.
Gang Loop Ties are used with Gangform Bolts on
modular form panels. Each tie has a 4-15/16” end and
1” breakback. The longer end allows breakback before
stripping. Optional 1”x1” plastic cones, neoprene
washer or special breakback available.
|
X-Flat Tie |
|
|
Type |
SWL * |
|
Standard X-Flat |
3,000 lbs |
|
Heavy Duty X-Flat |
3,500 lbs |
* Safe Working Load based on 2:1 safety factor.
The X-Flat Tie is used with Wedge Bolts on modular
form panels. The X-Flat Tie is commonly used on
residential and commercial projects in forming
situations that do not require a 1” breakback. The
standard breakback of the X-Flat Tie is 1/4”.
Base Tie
Type Wire Size Standard Base .225 SWL *
1,500 lbs * Safe Working Load based on 2:1 safety factor.
Base Ties are used with Base Tie Bolts along the side
rail of forms laying horizontally or when butting forms
against an existing concrete wall.
Note: All form ties are compatible with Ellis ProForm, EMI Elite and Symons Steel-Ply brands.
2525 Armitage Ave
Melrose Park, IL 60160
708-493-9569
www.surebuilt-usa.com
03/26
