Brace Insert Data Sheet
Brace Insert
Accurately position, quickly locate and securely fasten tilt-up panel braces
The Brace Insert has wire legs, welded to a coil insert, with a disposable plastic plug, providing the anchor point for subsequent bracing. The wire legs have plastic feet to prevent corrosion at the concrete face. The plastic plug has antennae to locate the insert after concrete placement. The number and location of Brace Inserts will vary based on the dimensions of each tilt-up panel.
SWL**
Part No.
SBBI345
Brace Insert with Plug* (Bolt sold separately)
Brace Insert 3/4”x5” wPlug
Description
7,200 lbs
SBBI346
SBBI34612
SBBI34714
Brace Insert 3/4”x6” wPlug
Brace Insert 3/4”x6-1/2” wPlug
9,600 lbs
9,900 lbs
Brace Insert 3/4”x7-1/4” wPlug
10,200 lbs
SBBI348
SBBI34812
SBBI34914
Brace Insert 3/4”x8” wPlug
Brace Insert 3/4”x8-1/2” wPlug
11,600 lbs
11,600 lbs
Brace Insert 3/4”x9-1/4” wPlug
11,600 lbs
SBBI3410
SBBI341114
SBBI3412
Brace Insert 3/4”x10” wPlug
Brace Insert 3/4”x11-1/4” wPlug
11,600 lbs
11,600 lbs
Brace Insert 3/4”x12” wPlug
11,600 lbs
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
The Inverted Brace Insert is designed for tilt-up panels where the anchor point for bracing is located on the bottom side of the panel.
SWL**
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
840 South 25th Ave Bellwood, IL 60104 708-493-9569 www.surebuilt-usa.com
SBIBI346
Inverted Brace Insert with Plug* (Bolt sold separately)
Part No.
Description
Inverted Brace Insert 3/4”x6” wPlug
9,000 lbs
01/24
Double Brace Insert
The Double Brace Insert (10” OC) has wire legs, welded to a coil insert with disposable plastic plugs, and Spacer Strap. The wire legs have plastic feet to prevent corrosion at the concrete face. The plastic plugs have antennae to locate the inserts after concrete placement. The Spacer Strap keeps the inserts properly positioned. The number and location will vary based on the dimensions of each panel.
When the disposable plugs are removed from the panel, the coil inserts are exposed, providing the bolt locations for subsequent bracing.
SWL**
Double Brace Insert (10” OC) with Spacer Strap
Part No.
SBDBI345
Double Brace Insert with Spacer Strap
Description
Double Brace Insert 3/4”x5”
12,960 lbs
SBDBI346
SBDBI34612
SBDBI34714
Double Brace Insert 3/4”x6”
Double Brace Insert 3/4”x6-1/2”
17,280 lbs
17,820 lbs
Double Brace Insert 3/4”x7-1/4”
18,360 lbs
SBDBI348
SBDBI34812
SBDBI34914
Double Brace Insert 3/4”x8”
Double Brace Insert 3/4”x8-1/2”
20,880 lbs
20,880 lbs
Double Brace Insert 3/4”x9-1/4”
20,880 lbs
SBDBI3410
SBDBI341114
SBDBI3412
Double Brace Insert 3/4”x10”
Double Brace Insert 3/4”x11-1/4”
20,880 lbs
20,880 lbs
Double Brace Insert 3/4”x12”
20,880 lbs
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
Double Inverted Brace Insert
The Double Inverted Brace Insert (10” OC) is designed for panels where the anchor points for bracing are located on the bottom side of the concrete placement. Other sizes are available on request.
SWL**
* Distance from edge is minimum 12” or loads must be reduced.
** Safe Working Load (SWL) based on 2:1 safety factor @ 3,000 psi.
Double Inverted Brace Insert (10” OC) with Spacer Strap
Double Inverted Brace Insert with Spacer Strap
Part No.
Description
SBDIBI346
Double Inv Brace Insert 3/4”x6”
17,280 lbs
