Thin Slab Coil Insert Data Sheet

Coil Insert – Thin Slab
L-shaped loop design for stability and capacity in thin concrete segments
• Leg design maximizes stability and capacity
• Coil diameters for 1/2”, 3/4” and 1” bolts
• Welded coils for a consistent and safe loading
• Lift with Single or Double Swivel Lift Plate
• Optional galvanized finish available on request
Thin Slab inserts are designed for handling thin segments.
Coil Insert – Thin Slab*
Part No.
Description
Wire (Dia)
Min Edge Distance**
Setback
Tension***
SBCITS12214
SBCITS34214
SBCITS34312
SBCITS1212
SBCITS1412
Coil Thin Slab 1/2”x2-1/4”
Coil Thin Slab 3/4”x2-1/4”
Coil Thin Slab 3/4”x3-1/2”
Coil Thin Slab 1”x2-1/2”
Coil Thin Slab 1”x4-1/2”
0.225 4” 1/2”
0.306 5” 1/2”
0.306 6” 1/2”
0.306 5” 1/2”
0.306 6” 1/2”
950 lbs
2,000 lbs
3,300 lbs
2,000 lbs
4,750 lbs
* Minimum 3/4” concrete cover required at bottom of insert.
** Minimum edge and corner distance required for each insert.
*** Safe Working Load (SWL) based on setback, 4:1 safety factor and 3,000 psi concrete.
840 South 25th Ave Bellwood, IL 60104 708-493-9569 www.surebuilt-usa.com
09/20

Swivel Lift Plate
Part No.
Description
Bolt Diameter
Bolt Length
Tension**
SBSLP34 Swivel Lift Plate 3/4” 3/4”
SBSLP1 Swivel Lift Plate 1” 1”
* Safe Working Load (SWL) based on 5:1 safety factor.
4” 7,000 lbs
5” 10,000 lbs
Double Swivel Lift Plate
Part No.
Description
Bolt Diameter
Bolt Length
Tension**
SBDSLP34 Double Swivel Lift Plate 3/4” 3/4” 4-1/2”
SBDSLP1 Double Swivel Lift Plate 1” 1” 5”
* Safe Working Load (SWL) based on 5:1 safety factor.
7,000 lbs
10,000 lbs