Formliners
American Formliners
Formliners
PAGE 2
========================================================================
American Formliners
More Patterns… More Possibilities!
Formliners can make a lasting impression in concrete
at an affordable price. And American Formliners has
the project experience, pattern recommendations and
material options to make sure every cast-in-place, tilt-
up or precast application is successful.
American Formliners has the patterns, including
brick, rope, fractured fin, wood grain and most DOT
textures, that will complement almost any concrete
structure. These patterns are being specified by
architectural/engineering firms and state Departments
of Transportation, and installed by concrete contractors
throughout North America every day.
American Formliners provides several advantages:
• State-of-the-art manufacturing
• Single-use and multi-use material options
• Hard-to-find pattern lengths for versatility
• Edge-to-edge match for seamless appearance
• Cost-effective pricing and nationwide availability
• Custom capability for unique applications
Surface details are permanently molded into the
formliner material during production, resulting in a
consistent concrete appearance.
Geometric and high-relief textures are reproduced with
single-use HIPS plastic, medium-use ABS plastic or
extended-use urethane materials.
Formliners are used in cast-in-place, precast or tilt-
up forming. HIPS and ABS plastic materials can be
installed using screws or staples. Urethane materials
are typically plywood-mounted with adhesive and
subsequently bolted to formwork.
2 Call 877-533-5842
PAGE 3
========================================================================
Leave a lasting impression!
Trapezoid Patterns
1100 – 1-1/2” Deep, 6” OC
1101 – 1-1/2” Deep, 4” OC
1102 – 1-1/2” Deep, 2” OC
1104 – 3/4” Deep, 2” OC
1105 – 1/2” Deep, 1-1/2” OC
1106 – 3/4” Deep, 1-1/2” OC
1107 – 1-1/2” Deep, 3” OC
1108 – 3/4” Deep, 4” OC
1109 – 1/2” Deep, 6” OC
1110 – 3/4” Deep, 4” OC
1111 – 1-1/2” Deep, 6” OC
1112 – 3/4” Deep, 6” OC
1113 – 1/2” Deep, 2-5/8” OC
1116 – ADOT Random Rib, 1-1/2” Deep
1117 – 1-1/2” Deep, 6” OC
1121 – 1/2” Deep, 6” OC
1122 – Random Striations
1127 – 1” Deep, 4” OC
1138 – 3/4” Deep, 1-1/4” OC
1153 – 1/4” Deep Tri-Level
1156 – 3/4” Deep Rib
1181 – Saw Tooth, 1” Deep Rib, 1-1/2” OC
1195 – 3/4” Deep, 6” OC
1196 – 1” Deep, 2-1/8” OC
Photo labels:
1101 1102
1104 1105
1106 1110
1113 1116
1122 1127
1153
Refer to the Pattern Catalog for complete selection and dimensions.
www.americanformliners.com 3
PAGE 4
========================================================================
American Formliners
Stone Patterns
1200 – Light / Medium Sandblast
1201 – Heavy Sandblast
1202 – 1-1/4” Random Ashlar Stone
1203 – 1-1/2” Random Ashlar Stone
1205 – 3/4” Aggregate
1206 – 3/4” Deep Fractured Concrete
1207 – 1” Quartz
1209 – 3/4” Fractured Granite
1212 – Oregon Basalt
1232 – Rustic Random Ashlar
1239 – Random Fieldstone
1240 – Random River Rock, 3/4” Deep
1241 – Random River Rock, 1-1/2” Deep
1255 – Vertical Flagstone
1265 – Limestone
1266 – 2” Random Ashlar Stone
1273 – Runningbond Ashlar Stone
1281 – Bush Hammer
1285 – Pea Gravel
1288 – Random Dry Stack
1290 – Phoenix Limestone
1295 – Sierra Drystack
1296 – Long Island Ashlar
Photo labels:
1202 1203
1205 1206
1207 1209
1239 1240
1255 1266
1295
Refer to the Pattern Catalog for complete selection and dimensions.
4 Call 877-533-5842
PAGE 5
========================================================================
Leave a lasting impression!
Wood Patterns
1300 – 1/4” Deep, 6” OC Grain
1301 – 1/8” Deep, 6” OC Pine Random Butt
1302 – 3/8” Rough Sawn Random Boards
1303 – 1/4” Deep, 6” OC Cedar Plank No Reveal
1304 – 1/2” Deep, 6” Smooth Shiplap
1305 – Barnwood
1306 – 3/4” Deep, 2” Cedar Grapestakes
1308 – 8” OC, Light Grain Random Butt Joints
1309 – 3-1/2” OC, Light Grain Protruding Reveal
1345 – Extra Rough Sawn Plank
Fractured Fin Patterns
1400 – 1/2” Rope
1401 – 1-3/4” Deep, 3” OC Rib
1404 – 1” Deep, 3” OC Rib
1405 – 3/4” Deep, 1-1/2” OC Fin
1406 – 1” Deep, 2-1/2” OC Rib
1407 – 3/8” Deep, 1-1/2” OC Rib
1410 – 1” Deep, 5” OC Ripper Rebar
1412 – 3/4” Fin, 1-1/2” OC
1422 – 1-1/4” Fin, 3-3/8” OC
1432 – 1-1/2” Fin, 3-1/2” OC
1442 – 1” Fin, 2” OC.
Photo labels:
1300 1305
1306 1345
1400 1404
1406 1407
1412
Refer to the Pattern Catalog for complete selection and dimensions.
www.americanformliners.com 5
PAGE 6
========================================================================
American Formliners
Masonry Patterns
1500 – 3/8” Deep, 8” x 16” Cinder Block
1501 – 2-1/4” x 7-1/2” English Brick
1502 – 8” x 8” Split Face Block
1506 – 1/2” Deep, 4” x 16” Slump Block
1507 – 3/4” Deep, 8” x16” Textured Block
1508 – 3/4” Deep, 9” x 18” Split Face Block
1509 – 1/4” Deep, 2-1/2” x 8” Smooth Brick
1510 – 2-1/8” x 7-1/2” Wire Cut Brick
1516 – 3/16” Deep, 8” x 16 Split Face Block
1519 – 2-5/8” x 7-5/8” Smooth Block Running Bond
1520 – 12” x 12” Split Face Granite Block
1522 – 8” x 8” Smooth Face Block
1523 – 8” x 8” Scored Smooth Face Block
1526 – 3/16” Deep, 8” x 16” Split Face Block Stacked
1529 – 16” x 2-5/8” Split Face Block
1549 – 2-1/2” x 7-1/2” Smooth Brick
1550 – Random Drystack
1560 – 8” x 8” Stacked Bond Block
1577 – Custom Split-Face Block
Miscellaneous Patterns
1600 – 53”x 125” Smooth Face
1603 – 1/2” Maximum Depth Flagstone
Photo labels:
1507 1508
1509 1510
1516 1550
1560
Refer to the Pattern Catalog for complete selection and dimensions.
6 Call 877-533-5842
PAGE 7
========================================================================
Leave a lasting impression!
Thermoform
HIPS – High Impact Polystyrene HIPS Formliners can be used to provide a textured concrete surface, in a
limited application, at an affordable price. Single use only.
ABS – Acrylonitrile Butadiene Styrene ABS Formliners exhibit impact resistance and UV shielding to reduce the
damaging effects of sunlight. Multiple uses up to 10 times.
Elastomeric
PE – Polyurethane Elastomer PE Formliners combine great resilience and high-tensile strength into a long-
wearing surface. Multiple uses up to 40-50 times.
PPE – Premium Polyurethane Elastomer PPE Formliners provide exceptional reproduction of the most difficult and
complex designs for a consistent appearance. Multiple uses up to 100+ times.
HIPS – High Impact Polystyrene
(Single use only)
Properties Rating ASTM
IZOD Impact, ft.-lb/in.
@70°F 2.0 D256
@0°F 1.3 D256
Tensile Strength 3,700 psi D638
Heat Deflection 188 D695
Vicat Softening 212 D1525
Wt.lb./sq.ft.
.070 mil .449
.090 mil .577
.110 mil .705
.130 mil .833
.150 mil .966
ABS – Acrylonitrile-Butadiene Styrene
(Multiple uses up to 10 times)
Properties Rating ASTM
IZOD Impact, ft.-lb/in.
@73° 5.6 D256
@0° 1.9 D256
Tensile Strength 5,300 psi D638
Heat Deflection
@264 psi 199 D648
@66 psi 211 D648
Falling Dart Impact, ft.-lb.
@73°F 23
@40°F 14
Specific Gravity 1.05 D792
Wt. lb./sq.ft.
.070 mil .451
.090 mil .580
.110 mil .705
.130 mil .833
.150 mil .961
PE – Polyurethane Elastomer
(Multiple uses up to 40-50 times)
Properties Rating ASTM
Shore A Hardness 45-50 D2240
Tear Strength, PLI 55 D624
Tensile Strength, psi 500 D638 (D412)
Ultimate Elongation 240% D638 (D412)
PPE – Premium Polyurethane Elastomer
(Multiple uses up to 100+ times)
Properties Rating ASTM
Shore A Hardness 60-65 D2240
Tear Strength, PLI 120 D624
Tensile Strength, psi 1150 D638 (D412)
Ultimate Elongation 1200% D638 (D412)
Manufacturing Tolerances @ 70F
(All patterns, all materials)
Standard size: 4’x10’
Length: +1” to 2”, -0” (shipped long for field trimming)
Width: ± 1/4”
Thickness: ± 1/16” at edge (except formliners over 1” thick)
Custom size: At customer request, additional charge.
Use subject to Surebuilt Terms & Conditions.
Visit https://surebuilt-usa.com/terms-and-conditions/ or scan QR code.
www.americanformliners.com 7
PAGE 8
========================================================================
American Formliners
Leave a lasting impression with formliners!
More patterns…
• Trapezoids
• Stones
• Wood Grains
• Fractured Fins
• Masonry
• Custom Services
More possibilities…
• State-of-the-art manufacturing by an industry-trusted name
• Single-use, multi-use and extended-use material options
• Hard-to-find pattern lengths for greater forming versatility
• End-to-end and side-to-side matching for seamless appearance
• Cost-effective material pricing with nationwide availability
• Custom design capability for unique forming applications
645 Airport Road • Centralia, IL 62801 • 877-533-5842 • Fax 618-533-5840
www.americanformliners.com © 09/26
8
