Maximum Strenth GFRP Rebar

Maximum Strength Deformed GFRP Reinforcement Bar
Sustainable, rust-proof alternative to traditional steel reinforcement
Maximum Strength Deformed glass fiber reinforced polymer (GFRP) Reinforcement Bar is the only integrally ribbed or deformed maximum strength GFRP reinforcement bar.
This reinforcement bar is 1/4th the weight of steel, 1/10th the CO2 footprint, and is 3 times stronger. This equates to enhanced jobsite safety, with significant savings in transportation and handling costs.
Maximum Strength Deformed GFRP Reinforcement Bar is non-corrosive and non-conductive which makes it suited for any environmental exposure.
Maximum Strength Deformed GFRP Reinforcement Bar does not conduct electricity, is non-magnetic, does not interfere with RF signals, and is UV Stable.
Steel Corrosion
Structures using steel rebar in corrosive environments will begin to fail after 10 years. Corrosion costs the private and public sectors hundreds of billions of dollars in repairs and maintenance costs a year.
Maximum Strength Deformed GFRP Reinforcement Bar can save the current costs of corrosion and eliminate all failures due to corrosion because it will outlive the concrete it is reinforcing.
840 South 25th Ave Bellwood, IL 60104 708-493-9569 www.surebuilt-usa.com
01/24

Maximum Strength Deformed GFRP Grade III Reinforcement Bar Specifications
Part No.
Description
Size
Weight
Mean Cross Sectional Area
Minimum Tensile Load
SBMSGFRP2
SBMSGFRP3
SBMSGFRP4
SBMSGFRP5
SBMSGFRP6
SBMSGFRP7
SBMSGFRP8
SBMSGFRP9
SBMSGFRP10
SBMSGFRP11
#2×20’ Max. Strength GFRP Rebar
#3×20’ Max. Strength GFRP Rebar
#4×20’ Max. Strength GFRP Rebar
#5×20’ Max. Strength GFRP Rebar
#6×20’ Max. Strength GFRP Rebar
#7×20’ Max. Strength GFRP Rebar
#8×20’ Max. Strength GFRP Rebar
#9×20’ Max. Strength GFRP Rebar
#10×20’ Max. Strength GFRP Rebar
#11×20’ Max. Strength GFRP Rebar
1/4”
6mm
3/8”
10mm
1/2”
13mm
5/8”
16mm
3/4”
20mm
7/8”
22mm
1”
25mm
1-1/8”
29mm
1-1/4”
32mm
1-3/8”
36mm
0.08 lb/ft
0.12 kg/m
0.15 lb/ft
0.22 kg/m
0.24 lb/ft
0.35 kg/m
0.34 lb/ft
0.5 kg/m
0.47 lb/ft
0.7 kg/m
0.60 lb/ft
0.9 kg/m
0.82 lb/ft
1.22 kg/m
0.94 lb/ft
1.4 kg/m
1.16 lb/ft
1.72 kg/m
1.45 lb/ft
2.15 kg/m
0.049 in2
32 mm2
0.11 in2
71 mm2
0.20 in2
132 mm2
0.31 in2
202 mm2
0.44 in2
285 mm2
0.60 in2
390 mm2
0.78 in2
507 mm2
1.0 in2
650 mm2
1.2 in2
819 mm2
1.55 in2
1,000 mm2
7,419 lbf
33 kN
16,636 lbf
74 kN
29,675 lbf
132 kN
45,411 lbf
202 kN
64,070 lbf
285 kN
87,675 lbf
390 kN
112,180 lbf
507 kN
146,126 lbf
650 kN
184,118 lbf
819 kN
224,810 lbf
1,000 kN
Maximum Strength Deformed Grade III GFRP Reinforcment Bar Specifications
Guaranteed Tensile Strength
Young’s Modulus, 􏰀
Ultimate Strain, εfu
Transverse Shear Strength, 􏰁
Bond Strength to Concrete
Strength of Bend (Straight Portion)
Young’s Modulus, 􏰂 (Bend Bar)
Glass Transition Temperature, Tg°
> 145 ksi
> 8702 ksi
> 1.7%
> 31.9 ksi
2.9 ksi minimum
> 130 ksi
7250 ksi
257° F
> 1000 MPa
> 60GPa
> 1.7%
> 220 MPa
20 MPa minimum
> 900 MPa
50 GPa
125° C
Strength of Bend (Bend Portion w/ minimum Radius Bend: 4x Diameter of Bar
> 87 ksi
> 600 MPa

Applications
Maximum Strength Deformed GFRP Reinforcement Bar is accepted to be used anywhere that steel rebar is used. It is especially necessary to use in coastal areas, near high voltage currents and near magnetic fields. Some examples would include dams, buildings, roads and bridges, pools and patios, piers, and parking garages.
Project Examples
Bridge
Freezer Slab
Insulated Concrete Form
Cold Temperature Storage
Infrastructure Rehabilitation
Bridge
Seawall
Non-Structural

The Only Authentic Integrally Ribbed GFRP
The specially engineered and designed Integral Rib mechanically locks the Maximum Strength Deformed GFRP Reinforcement Bar into the concrete. Unlike every other rebar (steel or GFRP), the only way to pull it out of the concrete is to break the concrete itself.
There are many benefits to the Integral Rib. Not only are there less cracks with smaller crack widths, you can also avoid 50% of traditional bent bar applications by using straight lengths of Maximum Strength Deformed GFRP Reinforcement Bar. These applications include but are not limited to joining slabs, joining walls to floors, corners, anchoring and less embediment lengths.
Products
Straight Bar
• Structural and non-structural rebar
• Available in custom lengths (4ft – 60ft)
• Diameters in stock: #3 – #8
• Custom diameter up to 2-1/8”
Compliance
USA:
• ASTM D7957/D7957M-17
• ACI 440.1R-15
• ACI 440.3R-12
• ACI 440.6-08 (R2017)
• ACI 440R-07
• AASHTO LRFD for GFRP-18 • ICC-ES AC454
• ICC-ES AC521
• Section 932-3 of Florida DOT
Bent Bar
• Structural bent rebar
• Custom shapes for any project
Canada:
• CAN/CSA S807-19
• CAN/CSA S806-12 (R2017)
• CAN/CSA S6-19
• MTO- 9.65.90
• SIMTReC Design Manual No. 3 (Version 2) • SIMTRec Design Manual No. 5